Home » Galaxy PLA Metallic - Emerald Green - 1.75mm - 0.75 KG
FormFutura Canada Galaxy PLA Metallic 3d Printing Filament
FormFutura Canada Galaxy PLA Metallic 3d Printing Filament
Formfutura

Galaxy PLA Metallic - Emerald Green - 1.75mm - 0.75 KG

Out of stock
SKU: 40-B-2-D-6227 Barcode: 8719956552328
$27.00 USD
-13% $31.00 USD $27.00 USD

Do you need help choosing the right material or 3D Printer for your application or require a quote to purchase? Contact Us

 FormFutura Canada Galaxy PLA Metallic 3d Printing Filament

Galaxy PLA is a deep metallic colored PLA range - based on our EasyFil PLA compound - with an incredibly high amount of silver aluminium-flakes added. The high added aluminium-flake content gives a beautiful sparkling, reflecting and glittering finish to Galaxy PLA printed objects.
Due to the high amount of silver aluminium-flakes added to the Galaxy PLA compound you can 3D print beautiful shimmering objects without visible layers and subtle color shadings and radiance. Even though its high silver-aluminium-flaked content Galaxy PLA is not abrasive to the nozzle of your 3D printer.

FormFutura Canada Galaxy PLA Metallic 3d Printing Filament

Unique features

  • Extremely glittering & shimmering surface finish

  • 3D print objects without visible layers

  • Not abrasive to the nozzle of 3D printers

  • Incredibly deep coloured 3D printer filament

  • Very easy to print

    • Warp-free printing and no deformation after cooling

    • Improved flowing behaviour and inter-layer adhesion

    • Good first layer adhesion to several (un)heated print surfaces

 3d filament net weight NET WEIGHT: 0.75 KG (1.65 LB)

3d printing temperature guideline Printing
Temperature:

Notes:
200°C - 230°C
  • Can be printed without a heated bed, but if your printer does have a heated print bed it is recommended to set your print bed temperature to approximately 35° to 60° C.
  • Will stick to most printing surfaces including blue tape.
  • Layer height: > 0.1mm
  • Nozzle size: ≥ 0.4mm
  • Enclosed printer needed: No
  • Print speed: Medium
  • Fan speed: 50-100%
  • Heated Build Chamber: No
  • Flow rate: ± 100%
  • Retraction: Yes ± 5mm
  • Printing surface: Blue Tape / Glass
  • Experience level: Beginner
  • Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.